Chemica HotMark Print Width: 20"

HotMarkPrint is our thinnest, stretchiest, and softest opaque printable heat transfer film!

• Prepare your design right-reading (DO NOT MIRROR) following the instruction of the printer manufacturer. NOTE: It is recommended to use OEM printer inks. Printable medias are very sensitive: always handle with care, preferably with gloves.
• Set your printing temperature to 45°C and drying temperature to 50°C.
• Use the adequate printing profile (for instance, with Roland COLORIP or VersaWorks, select the profile GENERIC VINYL 1, and we recommend to select the option MAX IMPACT).
• Remove the product from the printer and wait for the complete drying of inks at room temperature, at least 4 hours.
• Weed the excess material.
• Use an application tape(mask) to transfer your design.
• Position and heat press your design on the garment protected by a silicone paper at 320°F–20 seconds – medium pressure.
• If you used tape, peel it off when warm.